Redarc BMS Load Disconnect Isolator • SBI12-BLD

Product Details

The SBI12-BLD is used in conjunction with a REDARC Manager30 Battery Management System (BMS) to protect the auxiliary battery from excessive discharge. Specifically designed for use as the load disconnect solenoid controlled by the BMS, the black (earth wire) should be connected to the load pin of the BMS. The BMS sets the turn on and turn off points through its settings and switches this black wire (earth when loads should be on, no earth when loads should be off), and there is additional voltage thresholds monitored by the Smart Start SBI12-BLD to ensure reliable solenoid engagement. The SBI12-BLD smart start battery isolator incorporates a number of spike protection components specifically designed to reduce the risk of damaging the unit, and is designed to prevent any spikes generated by the solenoid coil from affecting vehicle equipment. 2 Year Warranty.

Overmould design
Compact in size and easy to install
Silver contacts for longer life and suitable for marine applications
Power saving technology
Fault indication
Fully surge protected

MAX. INRUSH CURRENT: 400A
MAX. CONTINOUS CURRENT: 100A
TURN ON VOLTAGE: 10.2V
TURN OFF VOLTAGE: 10V
TURN ON DELAY: 5 seconds
TURN OFF DELAY: 10 seconds
STANDBY CURRENT: <5mA
OPERATING CURRENT: <0.1A
WEIGHT: 7 oz (200 g)
HEIGHT: 2.48" (70 mm)
WIDTH: 2.95" (75 mm)
DEPTH | LENGTH: 3.15" (80 mm)
SYSTEM VOLTAGE: 12V
OUTPUT VOLTAGE: 12V DC
INPUT FUSE RATING: 100A
OUTPUT FUSE RATING: 100A

$140.00

Out of stock

Out of Stock